Adapt to changing weather on trail rides with this 3-in-1 flip windshield for compatible 2023–2026 CFMOTO ZForce 950 Sport, 950 Sport 4, 950 Trail, and 800 Trail G2 models, combining adjustable front coverage with sliding vents to manage airflow, wind, and rain.
Why You’ll Love This CFMOTO ZForce Flip Windshield
- Three ways to ride: Switch between fully closed, partially vented, and fully open positions using a one-hand handle.
- Fine-tune your airflow: Adjustable sliding vents let fresh air enter without fully opening the windshield.
- A durable, clear barrier: Heavy-duty polycarbonate resists cracking and deformation, while a hard coating adds scratch resistance.
- Seal out drafts: A pre-installed, full-perimeter rubber gasket helps reduce wind and rain intrusion around the edges.
- Hardware included: Supplied mounting hardware and detailed instructions support installation.
Best For Riders Who
- Ride through changing temperatures and unpredictable weather.
- Want front coverage and adjustable ventilation in one windshield.
- Use their compatible ZForce on wooded, dusty, or wet trails.
- Prefer to adjust the windshield without leaving the vehicle.
- Need a ZForce 950 windshield that works with most soft or hard tops.
Compares
| Feature | StarknightMT ZForce 3-in-1 Flip Windshield | A Fixed Windshield Without Vents |
|---|---|---|
| Coverage Adjustment | Closed, partially vented, and fully open positions | Stays in a fixed position |
| Airflow Control | Sliding vents provide additional adjustment | No built-in vent adjustment |
| Operation | One-hand handle changes the opening position | Panel cannot flip open |
| Surface Protection | Hard-coated PC adds scratch resistance | Depends on the panel coating |
Fitment
Compatible with the following vehicles:
- CFMOTO ZForce 950 Sport 2023-2026
- CFMOTO ZForce 950 Sport 4 2023-2026
- CFMOTO ZForce 950 Trail 2023-2026
- CFMOTO ZForce 800 Trail G2 2023-2026
Not Compatible with:
- CFMOTO ZForce 950 HO / EX models.
- G1 models.
Material & Protection
Material
- Heavy-duty transparent polycarbonate.
- Scratch-resistant hard coating.
- Pre-installed rubber perimeter gasket.
Protection
- Polycarbonate construction resists cracking and deformation.
- Hard coating helps protect the surface against everyday abrasion.
- Full-perimeter sealing helps reduce drafts and rain intrusion when closed.
Design & Fit
- Flip-up panel offers fully closed, partially vented, and fully open settings.
- Sliding vents provide additional airflow adjustment.
- One-hand handle allows position changes from inside the UTV.
- Contoured fit follows the roof and frame of compatible models.
Installation
- Mounting hardware and detailed installation instructions are included.
- Pre-installed gasket reduces seal preparation during setup.
- Confirm clearance and secure positioning with your existing roof.
FAQs
Q1: Will this flip windshield fit my CFMOTO ZForce 950?
A1: It is listed for 2023–2026 ZForce 950 Sport, 950 Sport 4, and 950 Trail models, plus the 800 Trail G2. It does not fit ZForce 950 HO / EX or G1 models.
Q2: Can I get airflow while keeping the windshield closed?
A2: Yes. The adjustable sliding vents let air enter without fully opening the flip-up panel.
Q3: What positions can I use?
A3: The windshield offers fully closed, partially vented, and fully open settings, controlled with a one-hand handle.
Q4: Can it work with my existing roof?
A4: It is designed to work with most soft and hard tops. Confirm your roof configuration and installation clearance before ordering.
Q5: Is the CFMOTO ZForce windshield scratch-proof?
A5: No. The hard coating improves scratch resistance, but abrasive contact can still mark the surface. Follow the manufacturer’s cleaning instructions.
Installation Guide
Installation Instructions: Installation instructions are included in the package.