Can-Am Maverick X3/Max Tinted Half Windshield

Deflect wind, mud, rain, and trail debris without closing off the cab using this dark-tinted half windshield for compatible 2017–2026 Can-Am Maverick X3 and X3 Max models, made from 1/4-inch hard-coated polycarbonate.

Why You’ll Love This Maverick X3 Half Windshield

• Heavy-duty panel: Quarter-inch polycarbonate provides a strong front barrier for off-road use.
• Hard coated on both sides: Dual-sided treatment improves scratch and abrasion resistance.
• Reduce glare: Dark tint and UV resistance help limit direct sunlight reaching the driver and passengers.
• Keep airflow moving: Half-height coverage deflects direct wind while retaining an open-cab feel.
• Secure, cushioned fit: A rubber edge seal and mounting clamps help absorb vibration and reduce panel movement.
• Remove when needed: Fast mounting straps support straightforward installation and removal.

Best For Riders Who

• Want wind and debris deflection without a full windshield.
• Ride a two-seat Maverick X3 or four-seat X3 Max.
• Prefer a dark-tinted panel for bright trail conditions.
• Need hard coating on both sides of the windshield.
• Want removable mounting that does not require a permanent installation.
• Do not have an intrusion bar installed.

Fitment

Compatible with:

• Can-Am Maverick X3 900 2018
• Can-Am Maverick X3 Turbo 2017-2026
• Can-Am Maverick X3 X DS Turbo R 2017-2026
• Can-Am Maverick X3 X RS Turbo R 2017-2026
• Can-Am Maverick X3 MAX X RS Turbo R 2017-2026
• Can-Am Maverick X3 MAX Turbo 2017-2026
• Can-Am Maverick X3 MAX Turbo R 2017-2026
• Can-Am Maverick X3 Turbo R 2017-2019
• Can-Am Maverick X3 MAX X DS Turbo 2017-2019
• Can-Am Maverick X3 X DS Turbo RR 2020-2026
• Can-Am Maverick X3 X RC Turbo RR 2020-2026
• Can-Am Maverick X3 X RS Turbo RR 2020-2026
• Can-Am Maverick X3 X MR Turbo RR 2020-2026
• Can-Am Maverick X3 MAX X RS Turbo RR 2020-2026
• Can-Am Maverick X3 MAX X MR Turbo RR 2020-2026
• Can-Am Maverick X3 MAX X DS Turbo R 2020-2026
• Can-Am Maverick X3 MAX X DS Turbo RR 2020-2026
• Can-Am Maverick X3 X RC Turbo 2018-2026
• Can-Am Maverick X3 X MR Turbo 2018-2026
• Can-Am Maverick X3 X RC Turbo R 2018-2026
• Can-Am Maverick X3 X MR Turbo R 2018-2019
• Can-Am Maverick X3 MAX XMR Turbo R 2019-2026
  

Material & Protection

Material

• 1/4-inch polycarbonate.
• Dual-sided hard coating.
• Dark-tinted finish.
• UV-resistant treatment.
• Rubber perimeter seal and mounting clamps.

Protection

• Helps deflect wind, rain, mud, sticks, and trail debris.
• Hard coating improves resistance to scratches and abrasion.
• UV-resistant tint helps reduce glare and direct sunlight.
• Polycarbonate is impact resistant but not unbreakable or scratch-proof.

Design & Fit

• Half-height shape preserves airflow above the windshield.
• Rubber edging cushions contact with the hood and frame.
• Mounting components help reduce vibration and rattling.
• Panel can be installed or removed using the fastening system.

Installation

• Position the seal and windshield evenly before tightening the mounts.
• Confirm that all clamps and straps are secure.
• Do not install with an intrusion bar.
• Check that steering visibility and vehicle controls remain unobstructed.

FAQs

Q1: Does this fit both X3 and X3 Max models?

A1: Yes. It is listed for compatible two-seat Maverick X3 and four-seat X3 Max models from 2017–2026.

Q2: Will it work with an intrusion bar?

A2: No. The supplied fitment information specifically states that it does not work with an intrusion bar.

Q3: Does the half windshield block all wind and rain?

A3: No. It redirects airflow and lower debris while leaving the upper front opening exposed.

Installation Guide